Showing posts with label Engineering. Show all posts
Showing posts with label Engineering. Show all posts


Volvo IT are hiring Graduate Engineer Trainees for 2011. You have to be referred by an Volvo IT employee to be eligible for the recruitment process. Send your resume to Volvo IT employees and ask them to refer you. The window for referring Graduate Engineer Trainees is open till 20th September 2011

All the recruitment activities will be held at Volvo IT, Bangalore. No travel reimbursement will be provided to the outstation candidates.

Eligibility Criteria

  • - B.E/B.Tech (Computer Science/ Information Technology/ Electronics (Electronics and Communication, Telecommunication) / Mechanical degree only) with no break in education.
  • - Graduated in 2011 batch only
  • - Consistent Academic performance (Score of 65% and above in Class 10th, 12th and Engineering)
  • - Excellent verbal & written communication skills


The eligible candidates meeting the above criteria will undergo the following process :

  • - Written test
  • - Technical & Managerial interview
  • - Shortlisted candidates will undergo Communication assessment test and HR interview
  • - Shortlisted candidates will be offered based on the availability of the positions


The robotics workshop and pro-show is being conducted by acclaimed firm GREY ORANGE ROBOTICS, who are the developers of India’s first indigenously developed humanoid robot 'AcYut'.

They will be conducting a three day workshop of 20 hours total dealing with the making of the humanoid hand.

This Robotics Workshop by masterminds of Grey Orange Robotics is first of its kind in Trivandrum. This is conducted in association with the Mega Fest "CULT A'WAY 2011".

Very limited Seats available.

For more Details, Confirmed Dates and Cost of Entry, please contact :

Tech-Convenor (Deepthi) : +91-8891431427
Cult Convenor (Faasil) : +91-9567016115

To know more about the events and the Fest CULT A'WAY 2011,

Please Visit our Facebook Page: http://www.facebook.com/cultaway

Or Follow Us on our Twitter Account : http://twitter.com/CultAway2011


Course Content:

* Basics of Arduino Software (With the help of Examples)

* Information on Hardware and Custom Controller Shield + Hardware required for building a Humanoid


Details about the Bioloid Kit

* Serial Bus Communication Protocol (AX -12/Dynamixel Protocol)

* Participants try to move a single AX-12 Motor

* Briefing on Factors affecting a robotic model with reference to a Humanoid

* Building a Kinematic Model for a 4 DOF hand and extending it to a 26 DOF Humanoid

* Introduction to Feedback protocol of AX-12 motors and basics of Tele-operation

* Basics of Creating a Custom Library For AX-12 in Arduino IDE

* Creation of an extensive library for implementation of Dynamixel Protocol on Ax-12 motors.

* Implementation of AX-12 protocol for controlling Multiple Motors

* Controlling motors through Splines (e.g.. S-Curve) and its importance in Humanoid robotics.

* Brief on Bioloid Modular Bracket System: assembling Motors and brackets into a 4 DOF hand

* Controlling robotic hand using Point to Point Data from an Predefined Array

* Implementation of Inverse Kinematics on 4 DOF hand

* Extension of Inverse kinematics to a Humanoid.

* Addition of a S-Curve, IK and Feedback functions to the Custom Ax-12 Library.

* Point to Point movement of robotic hand through LIVE feedback protocol

* Trajectory generation and applying it for controlling the robotic hand

* Drawing a sketch on a paper - An application of robotic hand

* Basics on generating a walking trajectory of a Humanoid Robot

* Applications of Automation and Control Systems

* Basic approach and difficulties of Humanoid Robotics

* Humanoid Control System (Use of COG and ZMP for balancing)


Take away Kit:

* A Fully functional ATMEGA 168/328 Arduino USB Board which is easily reprogrammable using the USB port. (It includes 1 USB, 1 Serial, 14 Digital Input/Output ports, 6 Analog to Digital converter Pins, 6 PWM etc)

* Arduino AX12+ Shield (An expansion board to control Dynamixel motors)

* Bread Board Kit (BreadBoard, Tricolor LED, Buzzer, photo resistor, Trim pot, Headers, resisters, leds etc)

* 12V SMPS based Power Adapter

* USB 2.0 A to miniB cable

* Software

* A4 Sheets and Sketch Pen

TATHVA’08 the Annual Technical Festival of NIT, Calicut and Technophilia Solutions presents a Robotics Workshop: ROBOKRITI – An Art of Building Robots, a certified course with an aim of Training Engineering students in the dimensionless field of robotics.

Venue:

At NIT Calicut
On 24-25 September 08

At CET Trivandrum
On 30 Sep-01 Oct 08

At NIT Calicut
On 23-24 October 08

Highlights:
Certificates for all participants by NIT, Calicut and Technophilia Solutions.

As the name indicates “The art of Building Robots”. A recent survey in Japan concludes that, to be a Master of Robotics, one should be good in Electronics, Mechanics and Computer science (programming) too.

Thus, RoboKriti is a workshop especially designed for newbie's and robotics enthusiasts of all disciplines from diploma Institutes to Engineering Colleges of all the branches like Electronics, telecommunication, mechanical, computer science, production, metallurgy etc. They will be introduced to the basic fundamentals of robotics and will learn to apply them in real life. Hands-on sessions will help them understand the practical aspects too.

The students will learn the basics concepts and will gain the practical experience while working on the robotics kit specially designed and developed by Team Technophilia. Using this kit, students will make a robotic vehicle which can be controlled via four mediums, viz:

Wired Remote control
Wireless Remote Control (RC Control)
Computer Control
Speech Control (Speech Recognition)

Click here to Register Now

With this basic robotics workshop, Team Technophilia ensures that the students get a hand over basic electronics, mechanics and computer programming for robot motion control. And the added attraction “SPEECH CONTROL”.

 Just imagine, you can ask your robot to run, dig, skid, take left, take right, stop etc. with speech commands. This is what we call as effortless control of robots.

Concepts Covered:

Session-1: Wired Robotics

INTRODUCTION
Robots
Robotics
Essential things required for Robot building

LOCOMOTION 
Wheeled
Legged
Flying
Floating

MOTORS
Types of Motors
Gear trains
Geared Motors
Japanese Motors for exhibition
Reduction in speed of motors
Increase in the torque of motors
Selection of motors as per the application

TRANSMISSION SYSTEMS
Gear
Belt Pulley
Chain Sprocket
Rack and Pinion
Worm and Spur Arrangement

GOOD PRACTICES FOR ROBOT BUILDING
Bearing
Bushing
Coupling
Linkages

BASIC CONTROL SYSTEM
DPDT Switches
Limit Switches
Relays

Session-2: Wireless Robotics ( RC Control)

WIRELESS COMMUNICATION
RF Transmission and Reception
What is Modulation ?
Types of Antenna
RF Modules
4-bit Encoders and Decoders
8-bit Encoders and Decoders
Address Protection
Problem of Latching ?
Quad Multiplexing

MOTOR DRIVER
Relays-Transistor Motor Driver
H-Bridge Motor Driver
Introduction to Pulse Width Modulation

PRINTED CIRCUIT BOARD (PCB)
Transmitter circuit board
Soldering of transmitter circuit board
Receiver circuit board
How to convert a circuit diagram into a PCB?
Layout designing
Overview of Manufacturing of PCB

SOFTWARE
Express PCB
Dip Trace
Eagle

Session-3: Computer Controlled Robotics
“By simple pressing of command buttons, mouse clicks on a computer one can control a Wireless Robot.”

ISOLATORS
Why do we need isolation?
Opto Isolators
PARALLEL PORT
DB-25 IBM PC Parallel Port
Parallel Port Registers
How to get the Parallel Port Address ?
Indepth explanation of Parallel Port Data Register
Interfacing Parallel Port with the Transmitter Circuit

VISUAL BASIC 6.0
Introduction to Visual Studio
How to access Parallel Port using VB 6.0?
Coding in VB 6.0
How to set a delay function?
How to do Pre-Programming ?

 Session-4: Speech Controlled Robotics
“By simply speaking out the control words on the microphone of a computer, one can make their robots run, dig, skid, take left, take right, stop, etc.”

 “ Effortless Robotics”

Use of Speech Recognition tool in VB 6.0
Microsoft speech recognition engine
And Coding

At the end of this exhaustive basic robotics workshop, Team Technophilia ensures that the students get a hand on basic electronics, mechanics and computer programming for robot motion control.

Duration:
We conduct workshop on 2 consecutive days, each day 10 hours session so in total 20 hours properly divided into theory and hands on sessions.
 
Charges:
The Cost of the Workshop is Rs. 990/- per student (applicable taxes extra)

The Charges includes:
Training fee of the 2 day workshop
Pre & Post workshop Handouts and training material
CD
Participation certificate
Additionally, a detailed manual of the kit will also be provided to each participant.

The RoboKriti Training kit content:
4 geared DC motors
4 ABS polished wheels with metal couplings
General Purpose robotic vehicle chassis
Wired Remote Control
Wireless Remote Control
RF encoder & decoder ICs
RF Modules of 434 MHz/315MHz
The Multi-control Receiver circuit board
Computer Isolators
Computer’s Parallel Port Hardware interfacing circuit board
DB-25 connectors and cable
Microphone for Speech Controlled Applications
Tools, switches and much more

** The Robokriti kit components can be purchased online at discounted prices after the workshop.

Click here to Register Now

Single Stuck Line is a fault model used in digital circuits. It is used for post manufacturing testing, not design testing. The model assumes that one line or node in the digital circuit is stuck at logic high or logic low. When a line is stuck it is called a fault.

Digital circuits can be divided into :-

1) Gate level or combinational circuits which contain no storage (latches and/or flip flops) but only gates like NAND, OR, XOR, etc.

2) Sequential circuits which contain storage.

This fault model applies to gate level circuits, or a block of a sequential circuit which can be separated from the storage elements. Ideally a gate-level circuit would be completely tested by applying all possible inputs and checking that they gave the right outputs, but this is completely impractical: an adder to add two 32-bit numbers would require 2^64 = 1.8*10^19 tests, taking 58 years at 1 ns/test.

The stuck at fault model assumes that only one input on one gate will be faulty at a time, assuming that if more are faulty, a test that can detect any single fault, should easily find multiple faults.

To use this fault model, each input pin on each gate in turn, is assumed to be grounded, and a test vector is developed to indicate the circuit is faulty.

Here a test vector is a collection of bits to apply to the circuit's inputs, and a collection of bits expected at the circuit's output. If the gate pin under consideration is grounded, and this test vector applied to the circuit, at least one of the output bits will not agree with that in the test vector. After obtaining the test vectors for grounded pins, each pin in turn is connected to a logic one and another set of test vector is developed to find these faults.

Each of these faults is called a single stuck-at-0 or a single stuck-at-1 fault respectively.

This model worked well for transistor-transistor logic (TTL), which was the logic of choice during the '70s and '80s. So well that manufacturers advertised how well they tested their circuits by a number called stuck-at fault coverage, which was the percentage of all possible stuck-at faults that their testing process would find.

It also works moderately well for CMOS, unfortunately not all CMOS faults can be modeled by a stuck at model. CMOS has what is called a stuck-open fault which cannot be reliably tested with one test vector, and requires two to be applied sequentially. The model doesn't include bridging faults between adjacent signal lines, occurring e.g. in bus connections and array structures, as well. Nevertheless the concept of single stuck-at faults is widely used, and with some additional tests, has allowed industry to ship an acceptable low number of bad circuits.

The testing based on this model is aided by several things :-

1) A test developed for a single stuck at fault often finds a large number of other stuck at faults.

2) A series of tests for stuck at faults will often, purely by serendipity, find a large number of other faults, like the stuck-open faults. This is sometimes called "windfall" fault coverage.

3) Another type of testing called IDDQ testing measures the way the power supply current of a CMOS integrated circuit changes, when a small number of slowly changing test vectors are applied. Since CMOS draws a very low current when its inputs are static, any increase in that current indicates a potential problem.

A fault model is an engineering model of something that could go wrong in the construction or operation of a piece of equipment. From the model, the designer or user can then predict the consequences of this particular fault. Fault models can be used in almost all branches of engineering.

Basic fault models in digital circuits include:

1. The stuck-at fault model

A signal, or gate output, is stuck at a 0 or 1 value, independent of the inputs to the circuit.

A stuck-at fault is a particular fault model used by fault simulators and automatic test pattern generation (ATPG) tools to mimic a manufacturing defect within an integrated circuit. Individual signals and pins are assumed to be stuck at Logical '1', '0' and 'X'. 

For example, an output is tied to a logical 1 state during test generation to assure that a manufacturing defect with that type of behavior can be found with a specific test pattern. Likewise the output could be tied to a logical 0 to model the behavior of a defective circuit that cannot switch its output pin.

Not all faults can be analyzed using the stuck-at fault model. Compensation for static hazards, namely branching signals, can render a circuit untestable using this model.

2. The bridging fault model

Two signals are connected together when they should not be. Depending on the logic circuitry employed, this may result in a wired-OR or wired-AND logic function. Since there are O(n^2) potential bridging faults, they are normally restricted to signals that are physically adjacent in the design.

3. The open fault model

Here a wire is assumed broken, and one or more inputs are disconnected from the output that should drive them. As with bridging faults, the resulting behavior depends on the circuit implementation.

4. The delay fault model

The signal eventually assumes the correct value, but more slowly (or rarely, more quickly) than normal.

Semesters are here,

At the paper we stare,

The answers are nowhere,

Which makes me pull my hair,

The teachers' glare,

The grades are below fair,

But just like the past years,

I REALLY DON'T CARE!!!

Subscribe to RSS Feed
Follow me on Twitter
Like Online assistant on Facebook
Follow me on Google Buzz
Get updates by email